Saturday, December 17, 2011

Cosmo's Moon jewelry: Stolen designs? Use Social media!

Cosmo's Moon jewelry: Stoleni designs? Use Social media! If you care about maintaining true handmade art read and repost this blog link.

Tuesday, December 13, 2011

Bracelets for Debora

Rasmussen Gems and Jewelry on Blogger is now connected to our Google+ account.  We will see how that works out.  With the holiday season upon us, I have two bracelets for my wife.  The first was purchased then modified.  It came with the dreidal and the chai charms, I restrung the bracelet with stranded steel wire and added the Star of David and the Menorah charms.  Hanukkah is approaching and Debora is Jewish (maiden name David).





The second is a cloissone charm bracelet.  The chain is made with 22 karat gold filled square half hard wire, then the charms were hung from the chain.  All of the chain links were hand wound, then sawn and burnished.



John


Sunday, December 4, 2011

Handmade Artists Shop of the Week

This week features Dahlish Knits. Gina has a fantastic sense of color.  This hairband can coordinate with almost any set of clothes.

Additionally, the purchaser can just go for simple function.  Keeping my feet warm is very important.  These hand knitted socks would do the trick.

This is a skill that I can not imagine.  I have no ability at knitting or anything similar.  Gina does this with children running around too.  Visit her shop and you can complete all your Holiday shopping.


Saturday, December 3, 2011

Pendant Project

For those who want to see the basic process for creating a piece of jewelry, here is a chronicle through the creation of a necklace pendant. 


First a brass blank was selected to put my design on.  I had an idea about a "drop" of metal with a stone inset at the bottom of the drop.   I drew a stylized drop on paper and then cut a brass blank that would be larger than the drawing.  The blank was 2 x 6 cm.  I cleaned the blank of oxidation.

Metal Blank
Metal Blank (Brass)

My next step was to "glue" my paper design onto the metal blank with a rubber type glue.  This makes it easy to remove the paper after cutting the shape from the metal blank.

Paper Pattern
  Paper Design on Metal Blank


The next basic step is to cut the pattern from the metal.  For this a jeweler's saw with a 5-0 blade was used.  Bur-Life applied to the blade, then the pattern was cut on my bench pin.  Now we have a rough cut pattern and need to pierce the round hole at the end of the pattern for the stone to be set in.  I selected a 9 mm 2.4 carat round rutilated quartz stone then cut a 7 mm hole in the bottom of the pendant.
Rough Cut
Rough Cut Pendant

Filing, a little dapping with an 8 mm punch, and hand polishing with red rouge completes the creation of the basic pendant.  The stone is set into the hole that was pierced in the metal and the pendant is complete and ready to go to the shop.

Finished Pendant
Finished Pendant


Here is the piece with a glossy finish from the polishing that gives the metal a silvery tone.  Of course, I started this project with a brass blank, so this is not marked or marketed as being silver.  This entire project was completed with cold working of the metal.


The shop will be at a "fleamarket" next Saturday.  Locally we have a bike trail that is rather long.  The fleamarket will be at mile marker 31.5 at the Swamp Rabbit Cafe and Grocery store (205 Cedar Lane Road, Greenville, SC).  Anyone in the area is invited to drop by and say hello.